Quantcast
Channel: Mellanox Interconnect Community: Message List
Viewing all articles
Browse latest Browse all 6226

Getting eIPoIB to work ?

$
0
0

OK, I've been trying to setup eIPoIB. I have my infiniband network up, ib0 is setup for ipoib I can see the new eth2 interface (virtual eIPoIB device) but nothing in the vifs, so I can't ping from compute node to compute node.

 

Welcome to Ubuntu 12.04.2 LTS (GNU/Linux 3.2.0-39-generic x86_64)


 * Documentation:  https://help.ubuntu.com/  System information as of Thu May  9 22:31:11 EST 2013  System load:  1.83              Users logged in:     0  Usage of /:   2.7% of 59.39GB   IP address for eth0: 192.168.10.101  Memory usage: 0%                IP address for ib0:  10.10.10.101  Swap usage:   0%                IP address for eth2: 20.20.20.101  Processes:    112  Graph this data and manage this system at https://landscape.canonical.com/


Last login: Thu May  9 21:55:22 2013 from maas.local
ubuntu@blade01:~$ sudo su -
root@blade01:~# cat /sys/class/net/eth2/eth/vifs
root@blade01:~#
root@blade01:~#
root@blade01:~# ibstat
CA 'mlx4_0'        CA type: MT25418        Number of ports: 2        Firmware version: 2.8.0        Hardware version: a0        Node GUID: 0x001b78ffff33ee58        System image GUID: 0x001b78ffff33ee5b        Port 1:                State: Active                Physical state: LinkUp                Rate: 20                Base lid: 5                LMC: 0                SM lid: 3                Capability mask: 0x02510868                Port GUID: 0x001b78ffff33ee59                Link layer: InfiniBand        Port 2:                State: Active                Physical state: LinkUp                Rate: 20                Base lid: 2                LMC: 0                SM lid: 1                Capability mask: 0x02510868                Port GUID: 0x001b78ffff33ee5a                Link layer: InfiniBand
root@blade01:~# ifconfig ib0
ib0       Link encap:UNSPEC  HWaddr A0-00-01-00-FE-80-00-00-00-00-00-00-00-00-00-00          inet addr:10.10.10.101  Bcast:10.10.10.255  Mask:255.255.255.0          inet6 addr: fe80::21b:78ff:ff33:ee59/64 Scope:Link          UP BROADCAST RUNNING MULTICAST  MTU:65520  Metric:1          RX packets:6 errors:0 dropped:0 overruns:0 frame:0          TX packets:30 errors:0 dropped:8 overruns:0 carrier:0          collisions:0 txqueuelen:1024          RX bytes:1515 (1.5 KB)  TX bytes:5752 (5.7 KB)


root@blade01:~# ping 10.10.10.102
PING 10.10.10.102 (10.10.10.102) 56(84) bytes of data.
64 bytes from 10.10.10.102: icmp_req=2 ttl=64 time=2.24 ms
64 bytes from 10.10.10.102: icmp_req=3 ttl=64 time=0.033 ms
^C
--- 10.10.10.102 ping statistics ---
3 packets transmitted, 2 received, 33% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.033/1.141/2.249/1.108 ms
root@blade01:~# ifconfig eth2
eth2      Link encap:Ethernet  HWaddr 00:1b:78:33:ee:59          inet addr:20.20.20.101  Bcast:20.20.20.255  Mask:255.255.255.0          inet6 addr: fe80::21b:78ff:fe33:ee59/64 Scope:Link          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          RX packets:0 errors:0 dropped:0 overruns:0 frame:0          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:0          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)


root@blade01:~# ping 20.20.20.102
PING 20.20.20.102 (20.20.20.102) 56(84) bytes of data.
^C
--- 20.20.20.102 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2015ms


root@blade01:~# cat /sys/class/net/eth2/eth/vifs
root@blade01:~# ????
root@blade01:~# ethtool -i eth2
driver: eth_ipoib
version: 1.0.0
firmware-version: 1
bus-info: ib0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
root@blade01:~#



Viewing all articles
Browse latest Browse all 6226

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>