I am running opensmd on both of the machines currently. There is one port connected (port 1) on each HCA.
Here's the information you requested.
#ifconfig ib0 and ib1
ib0 Link encap:UNSPEC HWaddr A0-00-01-00-FE-80-00-00-00-00-00-00-00-00-00 -00
inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0
inet6 addr: fe80::202:c903:17:c081/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:65520 Metric:1
RX packets:98 errors:0 dropped:0 overruns:0 frame:0
TX packets:40 errors:0 dropped:6 overruns:0 carrier:0
collisions:0 txqueuelen:1024
RX bytes:14349 (14.3 KB) TX bytes:6730 (6.7 KB)
ib1 Link encap:UNSPEC HWaddr A0-00-01-10-FE-80-00-00-00-00-00-00-00-00-00 -00
inet addr:192.168.10.2 Bcast:192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:65520 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1024
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 ib0
192.168.10.0 0.0.0.0 255.255.255.0 U 0 0 0 ib0
192.168.10.0 0.0.0.0 255.255.255.0 U 0 0 0 ib1