Clik here to view.
Re: MLNX_OFED install failed at Ubuntu 14.04.2
can you try and compile it without iser?
View ArticleRe: установка OFED на Ubuntu 14.10 (проблемы с прошивкой сетевого адаптера)
Thanks for the advice . Tried ... root@ivan-X7DWT:~# lspci | grep Infini07:00.0 InfiniBand: Mellanox Technologies MT25204 [InfiniHost III Lx HCA] (rev 20)root@ivan-X7DWT:~# root@ivan-X7DWT:~#...
View ArticleRe: установка OFED на Ubuntu 14.10 (проблемы с прошивкой сетевого адаптера)
Hi, I think the issue is that you're using a recent version of MFT package against an old card. I guess what you need to do in order to upgrade is to use an older MFT version (below 3.0) Can you user...
View ArticleRe: Debugging drops reported as vport_rx_dropped by ethtool
Hi, The ring buffer changes made with ethtool are being made to the network card itself. We are not changing the kernel network stack parameters but the NIC parameters in the firmware
View ArticleF-X430066/MT43132 Switch
I have a F-X430066/MT43132 Switch connected to Myricom 10G-PCIE-8AL-C Adapters in Windows 2012 r2 servers.The adapters are showing up in the servers as unplugged.I plugged the adapters to each other...
View ArticleClik here to view.
Why has support for ConnecX-2 cards been discontinued in WinOF 4.90?
Does anyone know if there are any technical reasons why support for the ConnecX-2 cards has been discontinued in WinOF 4.90? In particular, i'm thinking about problems that has been corrected like...
View ArticleRe: установка OFED на Ubuntu 14.10 (проблемы с прошивкой сетевого адаптера)
I tried . But faced with a problem. I downloaded mft-2.7.1-7.tar, unpacked , remove the old version mft with a script , which was part of the package. And when he tried to zaputsit ./install.sh script...
View ArticleRe: установка OFED на Ubuntu 14.10 (проблемы с прошивкой сетевого адаптера)
What OS are you using ?
View ArticleRe: установка OFED на Ubuntu 14.10 (проблемы с прошивкой сетевого адаптера)
Ubuntu 14.10 (3.16.0-23-generic)
View ArticleRe: Link up delay above QDR switches..
Hi! I found the root of problem. When ESXi host reboot vSphere OFED 1.8.2.4 doesn't logout from SRP Target. If stop the ibd daemon on ESXi host with "/opt/mellanox/bin/openib.sh stop" command thenZFS...
View ArticleIs there any update on the compatibility with Redhat MRG? Any projections?
Is there any projection on when the OFED will support Redhat running the MRG? Has anyone successfully built an OFED with this kernel? thanks
View ArticleRe: VLAN setup on SR-IOV enabled Mellanox ConnectX-3 (CentOS7)
After changing switch to SwitchX-2 SX6036, Ethernet link/port is UP. Resolved.
View ArticleClik here to view.
Re: I am getting "error polling LP CQ with status RETRY EXCEEDED ERROR status...
Hi, With these type of questions it might be more beneficial to describe your driver version, what transport layer are you working at, and the events from the kernel log. Cheers,
View ArticleRe: установка OFED на Ubuntu 14.10 (проблемы с прошивкой сетевого адаптера)
What do you think , what could be the problem?
View ArticleOmnios + RSF-1 + Inifiniband
Hi, I have a problem with a HA storage solution that has now been sitting in 'development' for a very long time now. We have set up a 2 node Omnios system with 3 disk racks, 2 ZFS pools, 1 each running...
View ArticleRe: IBM FlexSystem EN6131 40Gb ethernet switch and MIB
Hi Lucia, There aren't any unique MIB to flex.
View ArticleRe: Why has support for ConnecX-2 cards been discontinued in WinOF 4.90?
They are probably dumping support for them, to force upgrading, and if it turns out they are, our infiniband usage is also going to be dumped. As it means it unlikely to be supported in future OS's, we...
View ArticleRe: CVE 2014-8159 vulnerability
I noticed that while mellanox reported the problem to redhat (promptly fixed) upstream Linux kernel and ofed seem out of the loop (or atleast not fixing). I base this on the patch being missing from...
View ArticlePower Supply Sequencing on MSX60xx Switches w/ 2 PWR Supplies
The manual for the MSX60xx switches state that there should be a delay of minimum 2 seconds between powering on the two PWR supplieson switches with redundant PWR supplies. Why is this so ? Is this...
View Article