Re: Is kernel 3.18 supported by MLNX OFED 2.4.1.0.4?
Dear Yun, I was able to install OS: ubuntu 14.04Kernel: linux-headers-3.19.5-031905-genericMLNX_OFED Driver: 2.4-1.0.4I downloaded ubuntu 14.10 package from mlnx site and installed on my ubuntu 14.04....
View ArticleRe: MLNX_OFED install failed at Ubuntu 14.04.2
My system setup are the following. OS: ubuntu 14.04Kernel: linux-headers-3.19.5-031905-genericMLNX_OFED Driver: 2.4-1.0.4 and the setup works on ipoib, srp, iscsi & iSER. However, I am not able to...
View ArticleRe: vSphere 1.8.3 driver iSER result
1. Which version of driver did you install?MLNX-OFED-ESX-1.9.10.0-10EM-550.0.0.1331820 What's your HCA?CX354 P/N: MCX354A-FCCT2. What target are you using? I'm testing your partner storage company:...
View ArticleRe: vSphere 1.8.3 driver iSER result
1.9.10 is the Ethernet driver it does not support SRP it only support iSER.1.8.3 is the IB driver which support both iSER and SRP. That's why you are not seeing SRP in vSphere. I am not familiar with...
View ArticleConnectx-3EN and Connectx-pro: SRIOV : eswitch related query
I am trying to use Connectx-3EN and Connectx-pro adapters in SRIOV mode inside a PowerKVM host. Issue what I am facing is realted to VF-VF communication on the same NIC port/PF. I had created 4 VFs on...
View ArticleRe: Is kernel 3.18 supported by MLNX OFED 2.4.1.0.4?
Hi, Chris Thanks for the info, we've also investigated a little, there are plenty of compat code in 2.4.0 tarball forversion <=3.17, so seems like the project is based on 3.18+. While there are many...
View ArticleRe: How to enable nvgre on ConnectX ® -3 Pro
Hi, To the best of my knowledge, NVGRE has no offload support by the Linux Kernel. Only Windows OS is supported.Your best option right now is to use VxLAN. Thanks
View ArticleClik here to view.
Re: ibdump on Connect-IB cards
Since this can go many directions, I suggest you open a ticket with Mellanox support. let the folks debug your issue. send your issue to support@mellanox.com
View ArticleRe: Learning about Infiniband switches - Advice Please
This one is very well priced and - depending on your location - the postage is decent too: http://www.ebay.co.uk/itm/301613347569 Note - I don't have any relationship to the seller, I just typed in...
View ArticleClik here to view.
Re: Learning about Infiniband switches - Advice Please
Hmmm, see if you can get a hold of a Voltaire ISR 9024D-M. They're probably the best 20Gb/s speed combination of capabilities & noise. Anything that's SDR is likely to be extremely noisy, so...
View ArticleRe: What software to download?
Oh, those are ancient Infiniband cards. Very little modern software will work with them. For RHEL 6 though you may still be in luck. If you install the "Infiniband Support" group through yum (which...
View ArticleRe: Where to source low profile pci brackets.
Got around to doing this finally. .stl files in case anyone else finds them useful:MHGH-28XTC-low_profile_bracket1-7.stlMHGH-28XTC-full_height_bracket1-5.stl
View ArticleRe: What software to download?
I had 45 cards. So far of the 45, I have moved 20 systems to RHEL 6, 18 have worked. The Mellanox software I tried couldn't undate the firmware, but at least the RHEL 6 made most of them visible.
View ArticleClik here to view.
Re: What software to download?
Which software have you tried for burning the firmware, and what version? From memory (it's been a long time), you'll need to use "flint" prior to the 3.x.x releases. eg 2.7.2 should work:...
View ArticleHow can I get SX1036 (with L3 and 56g license) work with PPPoE?? I have a WAN...
I have 2x SX1036 switches, Each node has one VPI PRO dual port adapter, connected to both switches, At this moment I am using mellanox for all my networking, except for a small dedicated 1g copper...
View ArticleClik here to view.
Re: Best way to connect/cable WAN/Internet to Mellanox Switch, Advice on...
Hi Bent Vader, I will try to answer some of your questions: Q1 So, This gets us to my first question; What do you guys think about this idea? Please give me your thoughts, and tell me if I'm missing...
View ArticleClik here to view.
Re: How can I get SX1036 (with L3 and 56g license) work with PPPoE?? I have a...
Hi Bent, The MLNX-OS software doesn't support PPPoE.I would suggest opening a ticket at support@mellanox.com to open a feature a request so this feature would be considered for a future release.
View ArticleHPC-X MPI not supporting threaded MPI programs?
Hi, I could not find this answered in the discussion group. As far as I can tell the Mellanox HPC-X MPI is built without the option: --enable-mpi-thread-multipleto the OpenMPI configure script. Is...
View ArticleClik here to view.
SX6018 default firmware
Hello, Where i can find default firmware for SX6018 switch?Both images appears to be corrupt.Stuck on u-boot... 2 images at FF400000 and FF600000 but both with problems.
View ArticlePoor Infiniband Performance MT25418 on ESXi 5.1.0 U2
I am using an HP c7000 enclosure with 4 BL685c G1 blades, and a HP 4x DDR IB Swith Module. The blades are running Vmware ESXi 5.1.0 U2 . I am using the Mellanox ofed stack ( MLNX-OFED-ESX-1.8.1.0 )...
View Article