Re: How to program with SDP (Sockets Direct Protocol) on Linux
Hi, At first, you should load the SDP driver module (named ib_sdp.ko) into the kernel via modprobe if you want to use SDP sockets in the user-space like the traditional TCP sockets.I hope it could help...
View ArticleRe: mlnx-en systemd debian 8 issue
Hi Mark,Debian 8.2 is not in the list of supported at the moment.
View ArticleRe: mlnx-en systemd debian 8 issue
So you are saying there are no known issues with 8.1? I dont believe that as their have been very few changes with systemd between 8.1 and 8.2. Mostly just dns related.
View ArticleFirmware/OS MLNX-OS IMAGE
hi all i have a genuine Mellanox SX6012 Switch that i bought on ebay.I have the serial #, manufacture data is 2014 There is no issue with the switch it works fine! i have sent email to...
View ArticleRe: Firmware/OS MLNX-OS IMAGE
New Values Current Values Node GUID: 0002c90300ad6280 0002c90300ad6280 Port1 GUID: 0000000000000000 0000000000000000 Port2 GUID: 0000000000000000...
View ArticleRe: SX6018 ?? Please Help
hido you have access to mellanox to get the MLNX-OS? if so, i can show you how to update the firmware of your switch back to mellanox, by doing a custom firmware build. i have done it sucessfully on...
View ArticleClik here to view.
Re: Switch boot problem
hidid you get the image to download off the sx6018? if so can i have a copy of the MLNX-OS software please?
View Articlerdma_cm belong to kernel which is not a part of MLNX_OFED. how to fix that?
i got an errors when trying to restart openibd after install. centos 7.1 rpm -qa | grep...
View ArticleRe: Firmware/OS MLNX-OS IMAGE
Hi Bruce, What is the switch serial number? it's available from the "show inventory " cli command (chassis). regarding no response from Mellanox, that means that you even didn't receive any initial...
View ArticleRe: rdma_cm belong to kernel which is not a part of MLNX_OFED. how to fix that?
hm. when I add kernel support, then reinstall - and it works.
View ArticleRe: How to add a mellanox SR-IOV VF to a docker container ?
Looks like the best way to set the MAC for for the VF is 'ip link set vf <num> mac <mac>'.
View ArticleClik here to view.
Re: Firmware/OS MLNX-OS IMAGE
hello i submitted my request to mellanox several times (4 + now) over the last 2 weeks, have sent them 5 emails, now they bounce back from support@mellanox.com as blacklisted. no response at all from...
View ArticleClik here to view.
RDMA_CM connection setup issues
Hi Mellanox RDMA community, I've come across a (painfully intermittent) problem establishing RDMA_CM connections between processes running on linux machines. The application involves 8 servers and 40...
View Articleany way to get round with IP_ADD_SOURCE_MEMBERSHIP in libvma?
libvma can use only ip_add_membership, but some exchanges giving only SSM. any ways to get round this problem?
View ArticleRe: PCI-E Bus Errors with ConnectX-3 and Asus X-99E WS
Could you try the latest 3.1-1.0.3 from http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers ?
View ArticleRe: Firmware/OS MLNX-OS IMAGE
I recommend calling Mellanox to get a case opened properly and discuss support options.In the US, the support numbers on the website are these: Mellanox Call Center+1 408.916.0055Toll-free (USA...
View ArticleClik here to view.
Re: MCX312A-XCBT ConnectXR-3 card with Mellanox SFP module 1 Gb Ethernet
This basically comes down to the implementation on how LOS is detected on the RJ45 versus the SFP+ module. In the optical case the LOS can be detected either via the LOS or the LOS of the pin detector,...
View ArticleBurn u-Boot mlnx-os to JFFS2 as .img file-
does anyone know how to programm the .img file of mlnx-os to the flash (JFFS2) 1GB flash drive built into the SX10XX series of switches ive a corrupt boot image. (thus no mlnx-os running) can only...
View ArticleHow to build openvswitch with dpdk for ConnectX-3 NICs?
I'm looking for instructions to build the latest openvswitch w/ dpdk while using connectx-3 nics from mellanox and if possible in SR-IOV mode ?Has anyone done this?
View ArticleRe: Firmware/OS MLNX-OS IMAGE
I have problem like this but cant have access to switch cli. Can I get switch serial number from ofed or ibutils ?
View Article