Re: DPDK-OVS using connectx3-Pro binding issues
1. Any comments regarding dpdk version?[A] I recommend to use latest - DPDK 2.2. i've used MLNX_DPDK 2.1 and DPDK 2.2 from upstream. 2. As for ivshmem - we currently using native. However, you didn't...
View ArticleClik here to view.
ConnectX-3 and ConnectX-3 Pro Firmware release 2.36.5000 is now available
This is to let you know that ConnectX-3 and ConnectX-3 Pro FW 2.36.5000 is now available on : http://www.mellanox.com/page/firmware_download New features:
View ArticleRe: Do we have a strategy to isolate a CA port on Switch SX6018?
Dear Wesley Yu, What do you mean by " isolate CA port " ? do you mean to do enable/disable? Best Regards, Michael
View ArticleRe: What's the correct firmware version when use RHEL6.x inbox "Infiniband...
Hello Wei Zhao, Please use always the latest firmware version available on our website:http://www.mellanox.com/page/firmware_table_ConnectX3IBThe latest firmware version for MCX353A-FCBT is 2.36.5000...
View ArticleRe: Infiniband's RDMA capability on Windows 8.1 with Intel MPI
send/receive messages up to 2~3GB/sec seems to me a fair performance considering the fact you use a quiet old ConnecX-2 adapter over win8.1Use the Performance Tuning Guidelines for Mellanox Network...
View ArticleNew Firmware and Driver releases for ConnectX-4
The Host Winter release is available now on Mellanox.com DetailsConnectX-4 FW 12.14.1100ConnectX-4 Lx FW 14.14.1100Connect-IB FW 10.14.1100http://www.mellanox.com/page/firmware_download MLNX_OFED:...
View ArticleClik here to view.
my codes need to include umad.h and mad.h, but I can't find them on...
I installed ofed_3_2_win7x64 on my pc. my codes need to include umad.h and mad.h, but I can't find them ,Did I missed any package or anything wrong? thanks for your help. #include...
View ArticleRe: My one of the Mellanox card is not getting recognized as infiniband/roce...
Hi Anil, can you please restart the driver and check again?etc/init.d/openibd restart/Please also provide the following output: lsmod | egrep 'mlx|ib'
View ArticleRe: Do we have a strategy to isolate a CA port on Switch SX6018?
I mean if a switch find a CA port linkdown and then linkup too frequently, the switch will treat the port as an abnormal port, so that the switch reject to negotiate with that port. Thanks!
View ArticleRe: Do we have a strategy to isolate a CA port on Switch SX6018?
Dear Wesley Yu, No , we do not isolate IB port when the port is flapping. Best Regards, Michael
View ArticleRe: Do we have a strategy to isolate a CA port on Switch SX6018?
Michael, thanks for your confirmation!
View ArticleConnectX-3 [Hardware Error]: APEI generic hardware error status
Did anybody encounter this kind of error, It seems that CX-3 chip send the Unsupported Report to CPU? {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1[ 20.385139]...
View ArticleRe: HELP: DPDK with ConnectX-3 problem
Could you check if it happens with the MOFED v3.2?http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers
View ArticleRe: How to use two SX6536 switches to build a full line speed and congestion...
Hi Y Sheng, Below are 2 links that will help you with your questions: Designing an HPC Cluster with Mellanox InfiniBand SolutionsDesigning an HPC Cluster with Mellanox InfiniBand SolutionsHere you can...
View ArticleClik here to view.
Re: Connectx-4 VPI driver for VMware
I'm not sure Mellanox is "favoriting" iser over srp as a principle, It's just that iser is more scalable and more robust then srp within ConnectX-3 product. Correct. currently only...
View ArticleCan you use another manufacturers QSFP (10ge) in the MCX354A-FCBT
Can the MCX354A-FCBT utilize another manufacturers qsfp? I am currently utilizing fdr cables, but want to change this and connect up to dell 4810 switch?Can it run at 10ge or do i have to run it at 40ge?
View ArticleRe: Can you use another manufacturers QSFP (10ge) in the MCX354A-FCBT
an additional item, i have plenty of dell 10ge qsfp
View ArticleRe: How to use two SX6536 switches to build a full line speed and congestion...
To add to this, check also. Understanding Up/Down InfiniBand Routing Algorithm InfiniBand, Gateway and Long Haul Solutions Ophir.
View Articleunable to change link type from ib to Eth on Connectx4. mlxconfig -d...
I am also not able to bring the link up at 100G. My system is Xeon D 2.4G systemConnect X cARD IS cx416aOFED version is MLNX_OFED_LINUX-3.2-1.0.1.1-rhel7.1-x86_64Other details are below Driver...
View ArticleClik here to view.
Re: unable to change link type from ib to Eth on Connectx4. mlxconfig -d...
Hi,Did you try: Getting started with ConnectX-4 100Gb/s Adapter for Linux ? Where do you stuck?
View Article