Clik here to view.
Re: OFED 2.4-1.0.4 for EL7.2?
Hello Jon, Mellanox is not working on MOFED-2.4 anymore. So, no further OS will be added. Cheers,~R
View ArticleClik here to view.
Re: SX6036 IPoIB speed issue
Hi Rage, Thanks very much for your reply. Apologies for my late response, it's been a busy couple of weeks. 1. The driver is 5.22.12433.0 and firmware 2.36.5000. This was the latest as of a couple of...
View ArticleClik here to view.
RHEL 7.3 with HPE 545 QSFP
Product Name ProLiant DL180 Gen9HP Infiniband FDR 2-port 545QSFP Adapterkernel: mlx5_core 0000:06:00.0: firmware version: 10.10.5052 This adapter was working on RHEL 7.1 and failed after upgrade to 7.3...
View ArticleHow to correctly power down IS5200 and IS5300 switches ?
Hi, we have impending data centre maintenance and need to power off all our HPC equipment. I'm aware of the "no power enable" command for modules, but is there a correct procedure to follow for...
View ArticleRe: How to correctly power down IS5200 and IS5300 switches ?
Hi Greg, Please try: On the IS5200/5300 mgmt modules (both of each Chassis): switch(config)# reload halt
View ArticleRe: RHEL 7.3 with HPE 545 QSFP
Hi Rich Pope,please take a look at http://www.mellanox.com/page/firmware_table_hpe?mtag=oem_firmware_download Updating Firmware for HPE Enterprise Branded...
View ArticleRe: RHEL 7.3 with HPE 545 QSFP
Thank you, Talat. At the time, the Linux admin guys werwe traveling and did not have access to HPE contact info. I tried contacting NonStop support (which I deal with all the time) but they of course...
View ArticleClik here to view.
How can i connect 4 Server with ConnectX3 (dual port FDR) Infiniband without...
I don't want to make LAN network, I want to connect some of serversserver01 <= ping => server02server01 <= ping => server03server03 <= ping => server04like BUS network...
View Articlenot able to capure packets with ibdump
Hi, I am using 10G Mellanox card. I have generated traffic with krping. krping is success. But ibdump packets counts are not incrementing. Am I missing some thing? Do I need to use any specific MLNX...
View ArticleRe: How can i connect 4 Server with ConnectX3 (dual port FDR) Infiniband...
Hi arash,When working with infiniband opensm attaches to a specific IB port on the local machine and configures only the fabric connected to it.For the described environment you would have to use a...
View ArticleRe: How can i connect 4 Server with ConnectX3 (dual port FDR) Infiniband...
of course you could also go the hard way and run an OpenSM daemon on every peer-to-peer connection. when running your opensm instances, you will need to specify the port name you are binding the OpenSM...
View ArticleRe: NFS over RoCE Ubuntu 16.04 with latest OFED
Hi Ryan, could you check if MOFED-3.4 has the same behaviour?
View ArticleRe: Connecting 2 Mellanox Voltaire 4036 Switches
Hi Todd, This is the correct way to connect the switches and no other configurations needed.It also would not be a bad idea to add another cable between the switches for redundancy purposes. Marlon
View ArticleRe: Source specific multicast with VMA
VMA now supports IGMPv3 and source specific multicast. Supported from VMA 8.1.7
View ArticleRe: Where is the latest header file for windows libibverbs?
You might be interested into NDKPI provided by Microsoft. Using hardware vendor header files and libraries will just limit your application to specific realisation, so going on something generic is...
View ArticleClik here to view.
Re: Where is the latest header file for windows libibverbs?
We want to use multicast features of Infiniband.If I understood this correct NetworkDirect does not provide neither multicast nor Unreliable Datagram data transfer.
View ArticleRe: not able to capure packets with ibdump
Hi Rama,could you please tell me the device type (ConnectX3 or ConnectX4) and the Link type( Ethernet or Infiniband ) I guess that you use Ethernet and you want to capture RoCE packets. you can see...
View ArticleRe: not able to capure packets with ibdump
Hi Talat, My device is Connect X2, 10G Ethernet. It is Ethernet type. I can able to capture packets now with wireshark. But the packets are ROCV1 packets. I have generated traffic udaddy, krping. From...
View ArticleClik here to view.
Re: not able to capure packets with ibdump
Hi,As we see in the Mellanox Webpage, ConnectX2 devices doesn't support RoCE V2, see http://www.mellanox.com/page/products_dyn?product_family=79&mtag=roce"The Mellanox NICs with its hardware...
View ArticleWhere to find CX416A Driver for windows 7?
Hi all, as the question title states, where do I get a driver for MCX416A-CCAT for Windows 7 x64? I see it's available for windows 8.1 but we aren't using that as an operating system, I've exctracted...
View Article