Re: Mellanox Voltaire 4036 VLT-3011s way to reflash OS / reset password
Working on it with my social media people.Can you send me an example for a more recent one?
View ArticleRe: OFED version support on mixed environment
The answer would be: it shouldn't make a difference. The IB spec mandates all devices to be backward compatible with all speeds. OFED 2.0 probably does not mention previous speeds because they never...
View ArticleRe: Factory Reset Voltaire ISR9024m without console access?
If you are trying to make your own cable, cross pins 2 and 6. Or, use two RS232 to RJ45 connectors with Eth cross cable in between. should work..
View ArticleRe: Factory Reset Voltaire ISR9024m without console access?
P.S...2 - holding the reset for 30 sec won't work. the switch HW does not support that function.
View ArticleRe: OFED version support on mixed environment
Hi, thanks for the answer so far.Customers do want to have a clear picture about what's supported and what's not to define the steps to take in an upcoming upgrade, ie. do they need to upgrade the...
View ArticleMellanox eSwitchd issue on Openstack Havana nova-compute
Hi all,I have an SR-IOV enabled installation of Openstack Havana (RDO) on CentoOS 6.5 compute nodes. I have followed the docs atMellanox-Neutron-Havana-Redhat - OpenStack to set up Neutron on the...
View ArticleHow should I use the ipoibd daemon from Mellanox Openstack Havana repo with...
Hi all,I'm trying to set up Mellanox-Neutron-Havana-Redhat on OpenStack RDO using SR-IOV. I have sucessfully set up the Nova Compute hosts with openstack-neutron-mellanox, eswitchd and mlnxvif driver....
View ArticleRe: How should I use the ipoibd daemon from Mellanox Openstack Havana repo...
Hi, If you have Mellanox OFED >=2.1 the ipoibd file that comes with OFED is ok - there is no need to copy it from the repository,i updated the Wiki. Itzik
View ArticleClik here to view.
Re: Re: How should I use the ipoibd daemon from Mellanox Openstack Havana...
Hi Itzik,thanks for reply. I have already tried to start the ipoibd coming with Mellanox OFED 2.1 but it does not work. It does not creates a correct configuration. It also begin an infinite loop...
View ArticleRe: Mellanox Voltaire 4036 VLT-3011s way to reflash OS / reset password
Sorry Yair, I unsubscribed from anything to do with Mellanox after the last one, so don't have a more recent example.
View ArticleRe: Where to source low profile pci brackets.
Thanks Charles, considering it. Actually more tempted to model and 3D print a few here, just because it would give me a fairly simple practise object to experiment with for the 3D printer. Not sure...
View ArticleRe: Re: ib_srp disconnect on ESXi 5.0 with H:0x5 D:0x0 P:0x0 error
Hi Konrad,I discussed your issue with some smart fellows from Mellanox, this is what they had to say about your issue:- There is a similar internal record for such issue. also discussed by communities....
View ArticleRe: Mellanox Voltaire 4036 VLT-3011s way to reflash OS / reset password
No worries. i am still working with my team on that. Thanks!
View ArticleRe: 40Gb Ethernet in VMWare ESX 5.5?
What is the card's model number?There are 10G only and 10/40G types.
View ArticleRe: How should I use the ipoibd daemon from Mellanox Openstack Havana repo...
Hi, Can you please make sure you have only one ipoibd running ? ( ps -ef |grep ipoibd)Can you kill all the ipobd instances running and then do /etc/init.d/openibd restart. Thanks,Itzik
View ArticleRe: Re: How should I use the ipoibd daemon from Mellanox Openstack Havana...
Hi Itzik,yes, I have already checked for how many instance of the ipoibd daemon was running because I found strange that very line was repeated 3 times in the logs ;-)however there is only one instance...
View ArticleMellanox ofed 2.1 Centos 6.x system-config-firewall-tui hangs
Ive encountered an issue where system-config-firewall-tui hangs after installing Mellanox ofed 2.1 on just about every system i have (being several) , you can see modprobe going wild in top.Ive found...
View ArticleClik here to view.
Re: ib_srp disconnect on ESXi 5.0 with H:0x5 D:0x0 P:0x0 error
Hello everyone, Thank you very much for the time you've spent trying to help. I'm not 100% sure, but I've probably found the solution for the "H:0x0 D:0x8 P:0x0" errors and weird HCA behaviour, where...
View ArticleRe: 40Gb Ethernet in VMWare ESX 5.5?
The cards on both ends are: [root@basement mnt]# ibv_devinfohca_id: mlx4_0 transport: InfiniBand (0) fw_ver: 2.30.8000 node_guid:...
View ArticleRe: ib_srp disconnect on ESXi 5.0 with H:0x5 D:0x0 P:0x0 error
Sounds good my friend! Happy to see you were able to workaround the issue.
View Article