how do I update the firmware on MT23108 when kernel is 3.7.10
I have MT23108 firmware 3.3.5 and I want to update the firmware. The card is working under OpenSuse 12.3 but MSTFLINT does this mstflint -d 5:00.0 -i fw-23108-3_5_000-380299-B21_A1.bin b-E- Can not...
View ArticleRe: Hyper-V vSwitch speed problems
I think that 1.4GB/s performance derived from SMB Direct!But Hyper-V vSwitch performance is diffrent factor. I remember something exists tunning guide for that circumstances.i'll search and return for...
View ArticleRe: Hyper-V vSwitch speed problems
Any progress on finding some tips on how to set things up inbusiness?
View ArticleClik here to view.
Re: Mellanox 40 GbE and Dell Powerconnect 8164
Did you already try to upgrade your Switch firmware to 6.x and check if "service unsupported-transceiver" works for you on SFP and QSFP?See below from Dell:...
View ArticleRe: Hyper-V vSwitch speed problems
Hi!Unfortunately, there is nothing information to help you.I think that Microsoft focus SMB Direct only, because since introduction of Hyper-V shared nothing migration then Microsoft show a some...
View ArticleRe: Trouble with ConnectX-3 VPI adapter card over XenServer 6.2 (Service Pack 1)
Hi all, Finally the problem was fixed. After several tests, it seems that the problem was due to hardware incompatibility.We have repeated the same steps in other node (with different integrated board)...
View ArticleClik here to view.
ib_send_bw test with ConnectX-3 VPI adapter card over XenServer 6.2 fails...
Hi all, we are testing a ConnectX-3 card with XenServer 6.2. For that, we have two nodes, the first node has XenServer 6.2 dom0 and the second node has CentOS 6.4. In both nodes we have installed the...
View ArticleRe: OFED install firmware update fails on Ubuntu 14.04
Hi Cduced, This is a lower cost 10G card that has a flash size that is half the size of most of our other cards. Because of this there is no room in the eeprom to have two images in flash (which is...
View Articleibping fails between Mellanox MT26428 and qlogic QDR on Centos6.5
Hi All, I have a mix of Mellanox MT26428 and qlogic IBA7322 adapters all connected to a QLOGIC12300 switch.Everything used to work fine with Centos6.4, after the upgrade to Centos6.5 the iping between...
View ArticleSL4540 GEN8 + MT27500 Family [ConnectX-3] ---> random packets "dissapearing"
Hello, We´ve just build 9 RHES 6.4 servers (3xSL4540 blades) where we are running some network intensive software. The thing is that eventually, connectivity between this servers will fail (for...
View ArticleRe: Virtual functions did not come up at boot time of virtual machines
Tested latest driver MLNX_OFED_LINUX-2.2-1.0.1-rhel6.4-x86_64 and this problem does not happen. Seems like it got fixed.
View ArticleRe: OFED install firmware update fails on Ubuntu 14.04
Thanks. It would be nice if mlxfwmanager would handle the f/w upgrade but at least there is a straightforward workaround. -- Bud
View ArticleRe: SL4540 GEN8 + MT27500 Family [ConnectX-3] ---> random packets "dissapearing"
How you recover after you get into this state? Does it recover itself?"Lost" packets should leave some clues somewhere: do you see Rx/Tx errors or discards on hosts (with ifconfig for example) or on...
View ArticleRe: sx1036 as IB-to IP gateway
Does the SX1036 require a license to gain gateway and IB functionality?
View ArticleQoS for Virtual Functions(SR-IOV devices)
Configuration:Host: CentOS 6.4Mellanox Adapter: ConnectX-3 ENMellanox Driver: MLNX_OFED_LINUX-2.2-1.0.1-rhel6.4-x86_64 with SRIOV enabledVirtualization: KVM with SRIOV devices PCI passthroughed...
View ArticleRe: sx1036 as IB-to IP gateway
Hi Viper, Yes, the SX1036 requires a license, the license type is UPGR-1036-GW ( if you are looking at purchasing one )
View ArticleClik here to view.
Re: ib_srp disconnect on ESXi 5.0 with H:0x5 D:0x0 P:0x0 error
Hello again thowie . I've managed to find a way to quickly trigger the "H:0x0 D:0x8 P:0x0" errors doing some stress testing using fio. Try to deploy 2-4 VMs and use the 'fio --verify=md5 --rw=write...
View ArticleRe: Is it possible to switch ConnectX-3 VPI into Ethernet mode in Solaris 11.1?
Oracle owns the Infiniband (Mellanox) drivers in Solaris. Currently Solaris only supports Mellanox Infiniband drivers, not our Ethernet drivers. This is not currently supported by Oracle.Bill
View ArticleConnectX-2 firmware version
I am using ConnectX-2. I would like to update to the latest firmware.The latest version is 2.9.1000? http://jp.mellanox.com/page/custom_firmware_table The flashed firmware was 2.9.1314 now.----...
View Article