Re: IpoIB transfer rate 70 mb/s......
Hello Michaeli tried to connect the 2 esxi hosts directly to the poweredge r510 storage....... and suprise..... the transfer rate its less... about 20 Mb/s About OpenMPI i couldnt understand how to use...
View ArticleRe: Neutron ML2: VM instances do not get IP via DHCP
Hi Nishant,I just noticed that you were using documentation that was not updated with Icehouse Ml2 related details.Can you please verify your steps according to the following: Mellanox-Neutron-ML2 -...
View ArticleRe: Neutron ML2: VM instances do not get IP via DHCP
Hi Irena, I followed that doc too. However, I ignored the following under "3. Configure the DHCP server according to the following guidelines" as the link is broken. Can you please update the doc with...
View ArticleRe: Neutron ML2: VM instances do not get IP via DHCP
Hi,I would suggest to follow official OpenStack documentation for non Mellanox issues. For DHCP installation and configuration you can follow:DHCP agent - OpenStack Cloud Administrator Guide - current
View ArticleRe: Neutron ML2: VM instances do not get IP via DHCP
Actually, I wanted to confirm whether mellanox ml2 agents have anything to do with DHCP configuration or handling. Since, you are indicating they are unrelated. I will now pursue it as a separate...
View ArticleClik here to view.
Re: Neutron ML2: VM instances do not get IP via DHCP
Hi Nishant,Thank you for your questions. Sorry that the steps are not clear enough.Your comments will help us to improve existing documentation.
View ArticleClik here to view.
Re: Manual for this community
Do you use the jive plugin? I could remove your mark for correctness, but where do I add those marks myself? This is what I see
View ArticleRe: IpoIB transfer rate 70 mb/s......
Probably there is no such Softwarepackate like MPI for ESX. Why don't you first install a regular Linux like Centos to debug if this performance is related to defective hardware
View ArticleRe: Manual for this community
Not sure i understand your questions.If you want to respond to a person's question/discussion, you click on reply and post your comments.
View ArticleRe: Manual for this community
can you send me a screenshot and point me where to click if i want to mark a post helpful/ correct answer?
View ArticleRe: Manual for this community
Marking a post as Correct or Helpful will be shown only in case you are the person who posted the question/discussion. Mellanox Moderators also has the privileges to tag questions and discussions as...
View ArticleConfiguring iSER target using Mellanox MT26448 (ConnectX2) card
Can you please help me with following? I am trying to use Mellanox ConnectX2 card as target and I am getting following error when running tgtd there. tgtd(null): iser_ib_init(3397) rdma_bind_addr -1:...
View ArticleRe: Manual for this community
OK, understood marking. but with the jive plugin? Am I the only one trying to use it? Which version of Jive is Mellanox using?
View ArticleRe: Manual for this community
what about points- I spent 1000 for the T-shirt, so I have 175 points left. So I need to earn enother 1000 to get to level 5?
View ArticleRe: MTU 4K on ISR 9024-D-M
Hello Effe, You can find the user manual for this switch at the link below. On page 224 there is instruction on how to set the MTU. Hope this helps! -Steve...
View ArticleClik here to view.
Re: Manual for this community
Michael: We are running Jive 6.0.1. I will have to verify the level requirements (for points), but yes, you will need another 1,000 points to get to level 5. Cecelia
View ArticleRe: Adding kernel support error
try logging in as root user and do it again.. i see you are using sudo user.
View ArticleRe: Question about ConnectX-3 adaptors
Hi Volker,The ConnectX3-pro card is a VPI capable (Virtual Protocol Interconnect) which means, you can configure the physical ports to work with either Infiniband or Ethernet protocols so your first...
View ArticleHow to use SR-IOV on Xen 4.2 paravirtualized guests?
Hi all, I'm testing SR-IOV on Xen 4.2 with a ConnectX-3 MT27500 VPI adapter card. I have installed the mlnx ofed 2.2-1.0.1 with sr-iov support on Dom0 (Xen 4.2 over CentOS 6.4). The installation script...
View Article