Re: OFED install - not a valid identifier issue
Hi, Erez, The drivers download website only has 2.3-1. Where can I find 2.3-2? Thanks Isaac
View ArticleRe: OFED install - not a valid identifier issue
Hi Isaac, You're right, I only noticed the complete MLNX_OFED version went live on the web. it already contains mlx4_en 2.3-2 and you can try if that works out for you the mlx4_en standalone version...
View ArticleClik here to view.
Re: Connect problems with ISR 9024 switch
The switch indicates all ports are disconnected even with a cable in any of them. I toggle the enable/disable ports and there is no difference. If I use direct connection between nodes using IPoIB it...
View ArticleInfiniHost III Ex - Suspend/Resume not working on Debian Linux
Hello, I'm using an InfiniHost III Ex / MT25208 on Debian/Jessie and after running 'pm-suspend' and then resuming, my network stops responding. If I try to use ibstat or ibstatus then I will experience...
View ArticleClik here to view.
connectX-3 Port protocol setting
Ihaveaquestionabout "port protocl setting ". when I install the driver, The default setting of “port protoclol ” is “HW defaults ”。How to make it into the “auto” when I install the driver . OS...
View ArticleRe: InfiniHost III Ex - Suspend/Resume not working on Debian Linux
Hi, It's a bit hard to understand what actually happened without looking at the full kernel log. but the first issue looks like a memory issue with QP registrations which was most likely caused by an...
View ArticleRe: connectX-3 Port protocol setting
Hi, HW Defaults is currently the default out of the box mode which means that the port protocols will be determined according to the NIC’s hardware default values. the default mode currently cannot be...
View ArticleRe: Connect problems with ISR 9024 switch
Since your HCA is a VPI type, it could be that your cards are now set to Eth mode. the 9024 switch you are working is is IB only type. Try to set the card to IB mode. you should find a tool with your...
View ArticleRe: Problem adding kernel support on XenServer
it looks to me like the rpm tool command failed and now the OFED sources are missing so you're getting a compile error on iser. I'm pretty sure 2.6.32.43-0.4.1.xs1.8.0.847 was verified and would not...
View ArticleClik here to view.
Re: InfiniHost III Ex - Suspend/Resume not working on Debian Linux
Here's a more complete log output: Nov 18 14:28:29 alin kernel: [ 9.977168] ib_mthca: Mellanox InfiniBand HCA driver v1.0 (April 4, 2008)Nov 18 14:28:29 alin kernel: [ 9.977170] ib_mthca:...
View ArticleWhere can I find the source code of OpenSM in Mellanox OFED 2.3-2.0.0?
I was using Mellanox OFED 2.0-3.0.0 for Ubuntu, and under the SOURCES directory I had a file "opensm_4.0.5.MLNX20130808.c2b40b1.orig.tar.gz". I just updated my Ubuntu 12.04 machines to the latest...
View ArticleRe: Is ibdump in Mellanox OFED 2 supported in Ubuntu 14.04?
I was able to capture IB traffic with the ConnectX-3 adapters in Ubuntu 12.04, by using ibdump 2.0.0 from the Mellanox OFED RPMs.I just converted the rpm package to deb using alien.
View ArticleClik here to view.
Re: Where can I find the source code of OpenSM in Mellanox OFED 2.3-2.0.0?
I just see that according to the release notes: "Sources of all software modules (under conditions mentioned in the modules' LICENSE files) except for MFT, OpenSM plugins, ibutils2, and ibdump" are...
View ArticleRe: Is ibdump in Mellanox OFED 2 supported in Ubuntu 14.04?
Hi, I try to capture the RDMA traffic also with ibdump, but Ibdump 2.0 doesn't work on my host.OS: SUSE (SLES11SP3), library OFED-3.12-1-rc3, Mellanox Connect X-3 NIC. # ibdump --mem-mode...
View ArticleRe: Is ibdump in Mellanox OFED 2 supported in Ubuntu 14.04?
I have only tried with MLNX_OFED and it worked nicely for me. I was able to capture and open the files in wireshark.I haven't tried the OFED library.
View ArticleRe: Suggestions for *quiet* Infiniband switch?
Hi!I'll try to find some information via my knowledgebase file server, bookmark and Google...:)
View ArticleRe: Suggestions for *quiet* Infiniband switch?
The experts around this community site typically knowledgeable about Mellanox products. this is a Flextronix product (not made by Mellanox).good this switch model found the following:...
View ArticleRe: Where can I find the source code of OpenSM in Mellanox OFED 2.3-2.0.0?
no. the opensm code has few parts: the opensm itself and the opensm-plugins which are add-ons people write to add more fuctionality (like new routing algorithms)the OpenSM sources should be inside the...
View ArticleClik here to view.
Re: Where can I find the source code of OpenSM in Mellanox OFED 2.3-2.0.0?
Then why I cannot find any source file related to opensm in the latest release? I can only see the following source files under the directory...
View Article