how to get a (full) shell access?
hello there!i got a sx series switch (Ethernet Switches) and a particular (Virtualization for Infiniband and Ethernet) use-case demands that a full shell be accessible to download (inject) certain...
View Articlehca_self_test.ofed: Firmware Check on CA #0 (VPI) .......... FAIL:REASON:...
I am a new user of Infiniband. After installation of Mellaxon_OFED by default, I run the hca_self_test.ofed, and I got the information as follow: root@gpu-cluster-4:/usr/bin# hca_self_test.ofed ----...
View ArticleRe: how to get a (full) shell access?
Hi Girish, Can you share the use case mentioned in your question? It's not possible to get bash access to the switches.
View ArticleRe: how to get a (full) shell access?
thanks very much for following this up! my use-case is of SDN. we've a lightweight controller agent, that can be dispatched on a switch itself, to double it as a controller. we've been testing this...
View ArticleHow to connect a SX1012 Ethernet switch to 10Gb RJ45
We have just bought a new Mellanox SX1012 Ethernet switch. The idea was to interconnect a multicore server with a dual 10Gb Ethernet card (with RJ45 plugs) to a NAS also having a pair of 10 Gb (RJ45)...
View ArticleRe: How to connect a SX1012 Ethernet switch to 10Gb RJ45
Hi Miguel Angel, To answer your questions: 1) Are there any cables that directly split from QSFP to 4xRJ45?. no2) If not, with the current equipment, are there any kind of "adapters" from SFP+ to...
View ArticleClik here to view.
Re: How to connect a SX1012 Ethernet switch to 10Gb RJ45
El 30/12/14 a las 11:17, eddie.notz escribió:> Mellanox Interconnect Community...
View ArticleServer 2012r2 VOLTAIRE Infiniband PCI-E HCA 500EX-D Dual-Port Cards
Hi all, Being going round in circles for a while now with this. Windows Server 1) - Server 2012r2 VOLTAIRE Infiniband PCI-E HCA 500EX-D Dell R510 card in slot 3 PCI Gen2 X8 Single cable Windows Server...
View ArticleRe: hca_self_test.ofed: Firmware Check on CA #0 (VPI) .......... FAIL:REASON:...
Hi, It means that you are running on an outdated Firmware version with regards to your OFED driver version. this is not critical, but in order to avoid any uncesseray conflicts I would upgrade your FW...
View ArticleRe: MLNX_OFED_LINUX-1.5.3-3.0.0 kernel error.
Usually it can be originated from various reasons, I would start by making sure my servers are tuned accordingly from this document :...
View ArticleRe: supporting 1000base with a connectx-3
What cable / SFP adapter are you using ? do you have OFED installed ?
View ArticleRe: Does MLNX_OFED also support FreeBSD?
Hello, There should be an ethernet driver v2.1 for FreeBSD (the IB is inbox AFAIK).
View ArticleVMA WARNING: qpm[0x7f506542f100]:99:configure() Allocating only 16336 Rx QP...
I'm receiving VMA WARNING: qpm[0x7f506542f100]:99:configure() Allocating only 16336 Rx QP work requests while user requested VMA_RX_WRE=160000 for QP on <0x15777b0, 2> on a ConnectX3 when I set...
View ArticleFactory reset?
I've received a Mellanox MSX1036B-2SFS, and I appear to have typo'd the password during setup or something; I can't log in to the web UI or via SSH with the password I thought I set up. The online...
View ArticleClik here to view.
Re: Factory reset?
Hi Justin, Please keep pressing the button until the switch boot completely (you see the login prompt in the console).
View ArticleClik here to view.
Re: VMA WARNING: qpm[0x7f506542f100]:99:configure() Allocating only 16336 Rx...
I'm pretty sure that 16336 is the maximum number you can use.VMA tunes this according to the HCA capabilities and just warns the user of a change exceeding the HCA's limit..
View ArticleRe: Factory reset?
Well, we held it for a couple of minutes but it just kept rebooting, and never got to the login prompt. But when we gave up on that it seems to have reset the password. But not the network settings....
View ArticleClik here to view.
Re: how to get a (full) shell access?
Hello GirishIf I understand your requirement correctly, I think this requires SDK access. While this is allowed, we do require and NDA and SDK related training so you can develop your own protocol...
View Article