Re: Problem configuring and using IPoIB
and I've just checked, and I have the most recent FW on the mellanox site for an HT26428 (2.9.1000)
View Articleforwarding traffic between the ports
Hello, how to set upforwardingtrafficbetween interfaces HCA? Ringtopology.
View ArticleRe: Is the MC2206310 available in 1 meter length?
Ric Unfortunaly the shortest AOC we have is 3 meters. For shorter lengths our customers use copper cables given the cost benefit. We do not support lengths shorter than 3 meters are there is no...
View ArticleRe: Stack Huawei S5700-52X-PWR-LI-AC
I think you should contact Huawei on this question....
View Article40000LR not being advertised
I'm experiencing some difficulties in getting 40g LR optics to work with my Connectx-3 card.Relevent diagnostics: /etc/redhat-release:CentOS Linux release 7.1.1503 (Core) uname -a: Linux x.x.x.x...
View ArticleRe: Frequent TCP retransmissions with ConnectX-3 EN
Traffic is exchange market data (mcast) and orders (tcp/ip sockets). Not really observing any mcast drops -- just the retransmits. Nothing reported by ethtool as far as drops or errors: $ ethtool -S...
View ArticleRe: unable to create QP with IBV_EXP_QPT_DC_INI
Hi Sam, DCT is only possible with mlx5 architecture, so only Connect-IB or ConnectX-4 Regards,Erez
View ArticleClik here to view.
Re: Frequent TCP retransmissions with ConnectX-3 EN
Thanks, So you're saying a retransmit is not observed specifically when you're bursting traffic, but it is more random on normal load? What flow steering mode are you using ? you can check dmesg when...
View ArticleRe: Direct connect two windows machines with CX314A and passive copper cable
I just wanted to post here so that anyone who was reading my issue above would have the information. My only problem was that I was trying to use a VPI copper cable instead of the 40Gb ethernet copper...
View ArticleRe: HCA extended port counters
Yes exactly. There seems to be hardware and OFED version dependency whether the PortExtendedCounters attribute is exposed. I haven't discovered the pattern yet. Sometimes "perfquery --extended" will...
View ArticleRe: HCA extended port counters
At least in upstream kernel, I only see mandatory PortCounters support in /sys/class/infiniband but didn't chase every HCA driver to see if they augment this. Which HCA(s) and which OFED or MOFED are...
View ArticleRe: Problem configuring and using IPoIB
Does flex boot cause issues with trying to use IB normally? ibdiagnet seems to indicate errors in the FW but the most recent FW I found on the mlnx site is 2.9.100, and that is what my cards say they...
View ArticleConfiguration of ConnectX-3 to work with Virtualbox
I have a dual port ConnectX-3 installed in a Dell R620 server running the followingCentos 6.6mlnx driver 2.4.1.0.0.1Virtualbox 4.3.28Guest OS also Centos 6.6Bridged network adapter pointing to p1p1...
View ArticleRe: Frequent TCP retransmissions with ConnectX-3 EN
> Thanks, So you're saying a retransmit is not observed specifically when you're bursting traffic, but it is more random on normal load? Yes seem like just a normal load. > What flow steering...
View ArticleWindows 8.1 workaround for direct connection?
I am trying to set up an Infiniband link between an Asus esc4000fdrg2 server running Windows Server 2008 R2, and a workstation running Windows 8.1. The server has a built-in Infiniband FDR port. I...
View ArticleRe: Frequent TCP retransmissions with ConnectX-3 EN
Hi Bud, Assuming you're using OFED 2.4 - Can you copy paste dmesg output when the low lever driver loads (mlx4_core) ? and you can also try optimizing the flow steering mode - just create a mlnx.conf...
View ArticleClik here to view.
Re: Windows 8.1 workaround for direct connection?
There seems to be a driver that might be able to work with 8.1 client : http://www.mellanox.com/downloads/WinOF/MLNX_VPI_WinOF-4_95_All_win2012R2_x64.exe I would go through the archives and install an...
View ArticleRe: How do I load the MLNX_OFED_LINUX driver into Debian 6.0.10?
did you find any answer?
View ArticleRe: Configuration of ConnectX-3 to work with Virtualbox
Hi, if you're using IP forwarding you might want to disable LRO on the interfaces, seems like the kernel is pointing to a bad packet flow because of it. ethtool -K <ethx> lro off Please try and...
View ArticleClik here to view.
Re: How do I load the MLNX_OFED_LINUX driver into Debian 6.0.10?
As far as I'm aware of there's no official package for Debian 6.0.10, so your best bet is to see if the package for 6.0.9 driver is able to compile using DKMS which is supported in these distributions.
View Article