Clik here to view.
Re: Read port priority counters is 0 .
Hi Seol,1) MLNX-OS Switch Configuration: a. Have you created a VLAN and set the switchports to hybrid (or trunk) mode? b. Have you Enable PFC on the switch and on the interfaces? c. Does the...
View ArticleRe: Is it possible to update the firmware on a Voltaire ISR9024D externally...
@yairi flint and mstflint gave MFE_UNSUPPORTED_DEVICE@eddie.notz. thanks, I will try that.
View ArticleRe: Read port priority counters is 0 .
Thanks, Ophir Maor 1. Switch Port 1 and 5 not packets counters switch-5e13ce [standalone: master] (config) # show interfaces ethernet 1/1 counters priority 3 Rx 0 packets 0...
View ArticleRe: Is it possible to update the firmware on a Voltaire ISR9024D externally...
Nothing. same error.My guess is that somehow one has to disable the write protect on the EEPROM, but I have no idea on how to do that...
View ArticleRe: Read port priority counters is 0 .
Thanks, Sophie Naudin 1. Swich configuration is Hybrid mode and enable pfc setting seems there is no problem. switch-5e13ce [standalone: master] (config) # show dcb priority-flow-control PFC...
View ArticleCan't install OFED 3.1-1.0.3
I tried to install this latest OFED release on Ubuntu 14.04, but it fails since the "libibverbs1" package is not included (only "libibverbs-dev" is included).
View ArticleClik here to view.
WHAT CABLE SHOULD I USE FOR Mallenox 40GB NIC COMMUNICATE WITH OTHER Mallenox...
hello This a technology company from China, here we have problems, hope some one can tell us how to solve it. This situation is: We had update drive of Mallenox in our computer, and it showed that...
View ArticleRe: WHAT CABLE SHOULD I USE FOR Mallenox 40GB NIC COMMUNICATE WITH OTHER...
I think you did a test with a pair of FDR HCA. But, I don't know your cable is a Infiniband cable. Did you raise ip SM on one of that 2 system?
View Articlecannot enable lro in Ubuntu server
Hi, I am trying to enable lru on the mellanox 10g NIC.The default value is off {fixed}.When I tried to enable LRO, I couldnt as this is fixed. The driver version that I am using is 2.1.Is there any...
View ArticleClik here to view.
Re: Read port priority counters is 0 .
Hi Seol, Originally you used PC1 "Clotho" & PC2 "Aprotos", on my previous statement I asked: 1) When you run the "ib_write_bw" from the client (Aprotos), does the IP 192.168.10.10 correspond to the...
View ArticleRe: qperf version in RHEL6
I cant reproduce this using the Mellanox create yum repo script that comes with Mellanox OFED. Can you try the same ?
View ArticleRe: WHAT CABLE SHOULD I USE FOR Mallenox 40GB NIC COMMUNICATE WITH OTHER...
HI Yanqing Could you let me know which cable do you use? If it is Mellanox cable ? And if you have enable OpenSM on one server ? Thanks
View ArticleRe: WHAT CABLE SHOULD I USE FOR Mallenox 40GB NIC COMMUNICATE WITH OTHER...
Yes, I use FDR Optical cables from Mellanox. Your picture shows a Infiniband HCA (IPoIB) then you must running state SM on one of the direct connected Windows system...:)
View ArticleRe: Can't install OFED 3.1-1.0.3
Hi Brendan, Its one of the dependencies for the driver installation. Can you please install the "libibverbs1" package ? ThanksEinav
View ArticleClik here to view.
Re: Can't install OFED 3.1-1.0.3
Sorry, for the incorrect information. The issue was actually from the previous version not being uninstalled completely. Running the newer uninstall.sh script solved it for me.
View ArticlePartition configuration on Mellanox 5035 Fabric IT
Hi!I was used Mellanox Voltaire 4036 then transition to Mellanox 5035 QDR switch.Mellanox 5035 have a Web GUI itself and it has a ability configure partition on it. But I have a 2 major problems...
View ArticleRe: Partition configuration on Mellanox 5035 Fabric IT
Hi Jea-Hoon Choi, 1. why use an FDR cable between 2 QDR devices?2. can you share the switch running config with the partition configuration which is not working? + an ibnetdiscover ouput?
View ArticleRe: Partition configuration on Mellanox 5035 Fabric IT
Hi! 1. I have a plan to migration to FDR14 switch and HCA.2. How can I log in to Mellanox 5035 switch with root account? Have a nice day...:)
View ArticleRe: Partition configuration on Mellanox 5035 Fabric IT
Hi Jae-Hoon Choi, 2. To get the switch running-config, you can login as admin to the switch (I assume you have the admin password), switch> enableswitch# show running-config
View Article