Clik here to view.
Re: Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
Hmmm, so it seems like "printenv" shows the environment variables, "setenv" is used for setting them, and "saveenv" (hopefully) saves them to flash. It doesn't seem to list an explicit way to delete...
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
here we go! now we are getting somewhere! can you please post the output of ibstat command (or ibv_devinfo)who did you buy those cards from (once you tell me that, i will tell you if you are able to...
View ArticleRe: Getting transceiver info in Linux
Hi Johnny, Can you please open a case with Mellanox by, sending the issue to support@mellanox.com?Also please rollback on the changes you have done: # mv /usr/share/ibdiagnet2.1.1...
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Supermicro AOC-CIBF-M1 card... I looked for and didn't find newer firmware already (nor running mlxburn worked, it asks for a .ini) .. Same switch SX6025, same cables, same firmware (2.10.4700) same...
View ArticleRe: VM Passthrough of MHQH19B-XTR
I thought vt-D is essential for the whole virtualization platform? especially ESXi?
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
ohh... (Sorry), forgot to ask - what SW/FW level the switch is running with?
View ArticleRe: VM Passthrough of MHQH19B-XTR
Heh, I guess you're thinking of "VT" there: x86 virtualization - Wikipedia, the free encyclopedia "VT-D" isn't as fundamental. It's definitely needed for some use cases, but not everything....
View ArticleRe: Getting eIPoIB to work ?
Hi,I'm having the same issue as kenshiro. Has there been any updates? Although I'm using CentOS 6.3 64bit with MLNX_OFED_LINUX-2.0-2.0.5-rhel6.3-x86_64. What I found was when trying to manually start...
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Hi canesin,With Supermicro you should try to update using flint. They should normally provide you with .ini file anyway? Anyway flint command something like:flint -d <devicename_pci_cr0> -i...
View ArticleClik here to view.
windows 8 pro
The whitepaper, "Deploying Windows Server® 2012 with SMB Direct over Mellanox InfiniBand End-to-End Interconnect Solutions"describes a server that's windows 2012 and a client that's 2012. Is it...
View ArticleRe: Getting eIPoIB to work ?
Iliyas Aiyub - Ugh, that sounds like a bug. It might be worth explicitly emailing the Mellanox support team (support@mellanox.com) to let them know about it. (Eddie S - That's the correct approach...
View ArticleRe: Getting eIPoIB to work ?
Hi Justin,CentOS 6.3 is in the accepted OS. As well it gets mentioned in the release notes as compatible OS. I have already created a case, so I'll see what I get there.
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
=> setenv baudrate=38400=> saveenv=> printenv ------> disappear baudrate=38400 * If you reboot switch via reset command you can't see any message....IOI => setenv baudrate 38400=>...
View ArticleRe: VM Passthrough of MHQH19B-XTR
Hi xlx01,Can you try the (intermediate) FW 2.9.8350 from:http://www.mellanox.com/page/custom_firmware_table and let us know if it solves the problem.
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
Ok. All that's left to do now is make the corrupted 9024D-M environment the same as the good one isn't it? The "bootcmd" variable looks both different and important. It uses spaces in the value, which...
View ArticleRe: Re: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Great !! All adapters are in FDR mode and with latest drivers now!! \o/ .. worked with "flint -d /dev/.../..._cr0 dc" and after that mlxburn.
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Excellent. Now you're ready to rock and roll.
View ArticleRe: VM Passthrough of MHQH19B-XTR
2.9.1200 is released on 07-May-12 whereas 2.9.8350 is released on 07-Dec-11? In addition 2.9.1200 release notes mentions 2 bugs fixed: "PCIe FunctionLevelReset occasionally failed when the driver was...
View ArticleClik here to view.
Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
You are correct.... But I don't have any idea what can I do... This problem was originated my confused factory-default reset procedure.I'll drop the corrupted 9024D-M except PSU, Fan modules. I'll...
View Article