Clik here to view.
Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
Below is the command lists on PPC-Boot mode (Not safe mode)... PPCBoot 1.1.6 (Nov 16 2004 - 08:21:51) CPU: IBM PowerPC 440 Rev. CBoard: Artesyn Technologies PM/PPC-440gp Artesyn Monitor Version...
View ArticleRe: mlx4_ib: Unresolved symbol
Hey,I am getting the same errors on Scientific Linux 6.4 kernel 2.6.32-358.2.1.el6.x86_64.Mellanox ConnectX core driver v1.1 (Dec, 2011). Have you found the solution yet?Thanks.
View ArticleRe: mlx4_ib: Unresolved symbol
Jim Beam - Are you sure you need to use the Mellanox OFED drivers instead of the standard SL bundled ones?
View ArticleRe: mlx4_ib: Unresolved symbol
Hi Andy, Are you using Mellanox OFED, or the CentOS 6.4 supplied Infiniband drivers? If you're using Mellanox OFED, are you sure you need to? Asking because the easiest way for new Infiniband users...
View ArticleRe: Infiniband Performance Analysis?
hii agree with Justin. check your PCIE slot is PCIE-3 x 16 lane. as those new cards are PCIE 3 based. If they are in a PCIE2 slot they will only connect to 8 lanes, and thus be operating at 1/2...
View ArticleRe: mlx4_ib: Unresolved symbol
Justin, thanks for the hint. What exactly means optimised/better for some stuff? Can you share your knowledge with us? Are they any advantages of using 2.6xx kernels vs new ones 3.8xx?
View ArticleRe: mlx4_ib: Unresolved symbol
hiwe abandoned Kernel 2.6. and are now using 3.8.x on Ubuntu 13.04 Server. We were having many many issues with modules in 12.04. We tried Centos 6.3 and 6.4 but had similar issues as on Ubuntu. We...
View ArticleMellanox 4036 partition configuration
I have a Mellanox 4036 QDR switch.My QDR one doesn't have CLI for partition management. I make a partition.conf file and import to switch then restart SM on switch. But Just only 2 partition was...
View ArticleRe: mlx4_ib: Unresolved symbol
Bruce McKenzie - Were the problems with CentOS 6.x just for SCST stuff, or more in general? I looked at SCST stuff with CentOS 6.x yesterday, but it seemed all very complicated and I wasn't in the mood...
View ArticleRe: OFED 2 SDP Support?? FYI OFED2 - ITS FASTER!
Bruce McKenzie - Maybe you could compile in SDP support to Mellanox OFED 2.x yourself? http://git.openfabrics.org/git?p=~amirv/libsdp.git;a=tree
View ArticleClik here to view.
Re: Vmware ESXi 5.1 & ConnectX SRP Support
Thank you once again for your help Justin. Based on the fact that this is a lab environment and hence I try to stay up to date with the latest firmware, versions etc (the whole point of a lab is to...
View ArticleRe: ESOS SRP Target / SAN
Hi Haven't got any experience with ESOS SRP target / SAN,You can try use VSA-provider (Mellanox Acceleration Storage) to expose SSD disk arrays on the FC-SAN, than add targets/LUNs to create Volumes...
View ArticleRe: Problem driving MCX353A-FCBT with OFED3.5 on Fedora16
Your log show "[EC] Engineering changes: A4" that means your customer's HCA revision is A4. There are A1, A4 revision firmwares. Also check server vendor's guide and BIOS configuration.(Intel vt-D,...
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
[root@n02 MLNX_OFED]# ./mlnx_add_kernel_support.sh -i /root/MLNX_OFED_LINUX-1.5.3-3.1.0-rhel6.3-x86_64.isoERROR: Linux Distribution (centos-release-6-4.el6.centos.10.x86_64) is not supported
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Good point, I remember hitting that too. It was easy to solve though, I just had to edit the mlnx_add_kernel_support.sh script to accept CentOS 6.4, at which point it then runs through fine and does...
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Managed to install, but .. same problem: mlnxofed-docs ##################################################Device (04:00.0): 04:00.0 Network controller: Mellanox Technologies MT27500...
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Yeah, it could be that. This is definitely past my level of knowledge. You've done everything possible software wise, so if you can it'd be a good idea to start playing around with BIOS settings to...
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Oh, another useful util is to run "lspci" to query the pci card slot and find out exactly what it's seeing. Plenty of examples on this site if you haven't seen them already.
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
DID it!! Firmware was older than supported in OFED/MLNX_OFED (2.11) .. if someone needs I can pass the .iso created (or has a server disponible to be avaliable). ---- Performing Adapter Device Self...
View ArticleRe: Very stupid MHGH28-XTC question
Just in case anyone had the same issue as me, the Connect-X Windows 7 x64 drivers seem to work fine in Windows Server 2012 using this card. I've pinged and copied a few files around so hopefully when...
View Article