Re: Error /hca_self_test.ofed: line 165: [: too many arguments
and what is the output ofrpm -qf /lib/modules/2.6.32-431.20.3.el6.x86_64/weak-updates/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlx4/mlx4_core.ko If should return the RPM nameAnd could you check if...
View ArticleRe: Error /hca_self_test.ofed: line 165: [: too many arguments
Output follows rpm -qf /lib/modules/2.6.32-431.20.3.el6.x86_64/weak-updates/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlx4/mlx4_core.kofile...
View ArticleRe: Error /hca_self_test.ofed: line 165: [: too many arguments
It is strange. There should be RPM. Could you re-install MOFED by executing mlnxofedinstall script and check that there is no errors during installation?
View ArticleRe: Error /hca_self_test.ofed: line 165: [: too many arguments
I will try this in about an hour Sent from my iPhone
View ArticleRe: Error /hca_self_test.ofed: line 165: [: too many arguments
Reran install as you asked and saw the following, not sure these warnings will be a problem, while I had time I also ran the install on another machine with the same specs and it worked normally after...
View ArticleRe: Error /hca_self_test.ofed: line 165: [: too many arguments
Hi, Yes. this script simply check basic code revisions and link connectivity. which can be queried by other commands coming from the driver / infiniband-diags package
View ArticleClik here to view.
Re: Link speed limited to 10gbps
Howdy, Aleksey, thank you a lot for replying. Mellanox NICs (MCX313A-BCBT) are 40gbps Ethernet cards not IB HCAs. I don't use OFED but rather native Linux ethernet drivers provided by Mellanox....
View ArticleRe: Remove infiniband related drivers?
Ok, so i downloaded the package above that you mentioned and also looked over the pdf manual you listed. I ran ./install.sh (had to do it a few times as there are numerous dependencies I had to install...
View ArticleRe: Remove infiniband related drivers?
Edit. I reinstalled again with "./install.sh --disable-kmp" and that seemed to solve the issue with the nics not loading. Woo hoo! Now to see if I can get the udev rules to consistently name these...
View ArticleRe: Link speed limited to 10gbps
Just wondering, how can you see the firmware report 10gpbs?Did you try go through tunning guide - Mellanox Products: Mellanox OpenFabrics Enterprise Distribution for Linux (MLNX_OFED)?
View ArticleRe: Remove infiniband related drivers?
Well shoot, it seems these cards dont work with the mii-tool, thus i cant really even bond them them as bond-miimon is used. Right? root@stor2:~# mii-tool eth2SIOCGMIIPHY on 'eth2' failed: Operation...
View ArticleClik here to view.
Re: Link speed limited to 10gbps
Hi Phillip: We use the embedded chip and experienced limitations (10Gbps, others) with the Linux Mellanox driver. We were also testing in a cross connect circumstance like you. We switched to OFED...
View ArticleRe: Link speed limited to 10gbps
There are driver sources left by the installation, in /usr/source/mlnx-en-2.2, driver tree could instrumented, recompiled, etc. It seems that Mellanox is using some soft of mailbox mechanism to talk to...
View ArticleRe: Link speed limited to 10gbps
Hi, Gage, Thank you for interesting suggestion. Unfortunately no speed-up with trying the OFED distribution - it seems standalone Linux ethernet driver and Ethernet driver from OFED are practically...
View ArticleRe: Link speed limited to 10gbps
Hi Philip: I like your idea about the cables; the Mellanox IB is hyper-proprietary and no doubt this bleeds over into the VPI world; I just had a conversation with a cable engineer about this a few...
View ArticleQSFP+ Amber & Arista 7050 SFP+ green but can't pass traffic
We have four on-board QSFP+ we are converting down to an SFP+ using a Mellanox QSA passive adapter. http://www.mellanox.com/pdf/prod_cables/QSA.pdf We are then plugging this QSA into our QSFP+ and...
View ArticleClik here to view.
Updating OFED drivers from 1.5.3 to 1.5.4
Greetings, I hope someone with experience can provide some tips or assist. I'm attempting to upgrade the Mellanox drivers on a system with a ConnectX-3 card. This is my very first atttempt...# lspci |...
View ArticleConnectX3 FreeBSD 10 ethernet mode
Hello, I see there are new updated FreeBSD 10 drivers for ConnectX3 adapters along with the userland OFED tools. We were able to get the new drivers and tools working but there's very limited...
View ArticleRe: ConnectX-3 FreeBSD support
http://permalink.gmane.org/gmane.os.freebsd.devel.infiniband/30 Sven, I saw an entry in the mailing list (above link) from a Mellanox employee who's the OFED-FreeBSD Team Leader. It looks like they...
View ArticleRe: ConnectX-3 FreeBSD support
To compile and install FreeBSD 10.0 stable/release kernel with MLNX drivers:1. To have full OFED driver (both Infiniband and Ethernet) add the following options/devices to kernel configuration file:...
View Article