Re: multiport IB card pros
Thank you for shedding some light on it. I am still usure if the following setup will work with IB: - 40Gbit IB switch- storage server with 2-port IB 40Gbit card - both ports linked to the same IB...
View ArticleRe: multiport IB card pros
In that case you will need to connect 4 clients to one server port, the other 4 clients to the other port.What I mean by that is that ib0 from the server and 4 clients should be in the same IP subnet....
View ArticleNeed guidance on partition.conf
I am working on Grid Director 4036 and need some guidance on the build-in sm. Looks like the only way to configure partition is to import partition.conf file. This is my first time configure this and...
View ArticleRe: el5.10 ofed build problem.
Same problem here, on RHEL 5.10 x86_64. Looks like the 2.6.18-371 kernel brought some header changes which MLNX_OFED_LINUX-1.5.3-4.0.42-rhel5.10-x86_64 was not prepared for.
View ArticleWindows IB Verb Documentation
I am looking to create an application that uses IB verbs on a Windows system and was wondering where I could find documentation on using the verbs? Thank you.
View ArticleRe: Looking for mellanox 10GbE drivers on VMware ESXi 5.5
Mellanox Support replied to me that only ESXi 5.1 is supported until now.
View ArticleRe: el5.10 ofed build problem.
Your logs point to conflicts in headers between different kernels you have on the system. Please make sure you install all rpms (including kernel-devel and kernel-headers) corresponding to your target...
View ArticleClik here to view.
OFED (MLNX_OFED) 2.1 for ubuntu 12.04
Hi All, I have previously installed MLNX_OFED 2.0 in ubuntu, which happen require kernel 3.7, where as the current Ubuntu installation usually come with kernel 3.8. As the new MLNX_OFED 2.1 just...
View ArticleRe: Unstable operation of WinOFED 4.40.0 with HCA fw 2.30.3200 on Win2012 Server
Hello, Rian.Thank you for comment. There is no bonding on windows side configured. There are no port counters errors, ibdiagnet show no errors at all.
View ArticleRe: Unstable operation of WinOFED 4.40.0 with HCA fw 2.30.3200 on Win2012 Server
So far recently I've installed new WinOF and firmware. So things are going better now, but still I have some issues with packet loss. As before, linux to linux communications are good and linux to...
View ArticleRe: Unstable operation of WinOFED 4.40.0 with HCA fw 2.30.3200 on Win2012 Server
Hi Alexey, I would recommend trying the new WinOF release 4.60. Let me know if that helps.
View ArticleFlexBoot linux IBoIP
Dear community.Trying to figure out how to use FlexBoot for our IB only server nodes.Reading the...
View ArticleRe: OFED (MLNX_OFED) 2.1 for ubuntu 12.04
Hi Amirul, Mellanox OFED 2.1 supports kernel 3.8
View ArticleRe: MLNX_OFED_LINUX installtion Error: Error: The current MLNX_OFED_LINUX is...
Hi ,To configure ip , and for configuration in general i'll recommend using the Mellanox OFED user...
View ArticleRe: XenServer support
Hi, I have been working on getting this up and running. We're using XenServer 6.2. I made the changes that you suggested and when I attempt to install the OFED package (modified 1.5.4.1) I get this...
View ArticleClik here to view.
Re: XenServer support
In looking a bit further, there is no build directory in that tree. Why would the install.pl script reference it unless it should be there? Thanks, Winman1024
View ArticleRe: Need guidance on partition.conf
1. Full member can communicate with both full and limited members, and limited can only communicate with a full member(s). 2. Total number of partitions is 0x7fff (since MSB used as a membership flag:...
View ArticleRe: XenServer support
Are you building this in the DDK VM ? or a production installation of XS? Production XS doesn't have the dev libs.
View ArticleRe: Unstable operation of WinOFED 4.40.0 with HCA fw 2.30.3200 on Win2012 Server
Hell, Rian. I've tried installing it already, but it didn't help. You can see some statistics in my comment above.
View Article